Python Modules

Introduction to Python Modules

The Python module packages add useful objects to the Python language. Modules utilized by packages throughout BLFS are listed here, along with their dependencies.

D-Bus Python-1.2.8

Introduction to D-Bus Python Module

D-Bus Python provides Python bindings to the D-Bus.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

D-Bus Python Dependencies

Required

dbus-1.12.12 and GLib-2.58.3

Recommended
Optional

tap.py (required for tests)

Optional (Required to build the API and HTML Documentation)

docutils-0.14 and Sphinx with sphinx_rtd_theme

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/dbus-python

Installation of D-Bus Python

[Note]

Note

Both Python 2 and Python 3 modules can be built and installed without any conflicts.

To build D-Bus Python as the Python 2 module, run the following commands:

mkdir python2 &&
pushd python2 &&
PYTHON=/usr/bin/python     \
../configure --prefix=/usr --docdir=/usr/share/doc/dbus-python-1.2.8 &&
make &&
popd

To test the results, issue: make -C python2 check. One test reports error due to dbus issues.

To build D-Bus Python as the Python 3 module, run the following commands:

mkdir python3 &&
pushd python3 &&
PYTHON=/usr/bin/python3    \
../configure --prefix=/usr --docdir=/usr/share/doc/dbus-python-1.2.8 &&
make &&
popd

To test the results, issue: make -C python3 check.

To install the Python 2 module, run the following command as the root user:

make -C python2 install

To install the Python 3 module, run the following command as the root user:

make -C python3 install

Contents

Installed Programs: None
Installed Libraries: None
Installed Directories: /usr/share/doc/dbus-python-1.2.8 and /usr/lib/python2.7/site-packages/dbus and/or /usr/lib/python3.7/site-packages/dbus

docutils-0.14

Introduction to docutils

docutils is a set of Python modules and programs for processing plaintext docs into formats such as HTML, XML, or LaTeX.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

Docutils Dependencies

Optional

Python-2.7.15

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/docutils

Installation of docutils

To build the Python 3 applications, run the following command:

python3 setup.py build

To install the Python applications run the following as the root user:

python3 setup.py install --optimize=1 &&

for f in /usr/bin/rst*.py; do
  ln -svf $(basename $f) /usr/bin/$(basename $f .py)
done

Contents

Installed Programs: rst2html4, rst2html5, rst2html, rst2latex, rst2man, rst2odt_prepstyles, rst2odt, rst2pseudoxml, rst2s5, rst2xetex, rst2xml, and rstpep2html
Installed Libraries: None
Installed Directories: /usr/lib/python3.7/site-packages/docutils

PyAtSpi2-2.30.0

Introduction to PyAtSpi2

The PyAtSpi2 package contains Python bindings for the core components of the GNOME Accessibility.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

PyAtSpi2 Dependencies

Required

PyGObject-3.30.4

Recommended
Optional

Python-2.7.15

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pyatspi2

Installation of PyAtSpi2

To build PyAtSpi2 as a Python 3 module, run the following commands:

./configure --prefix=/usr --with-python=/usr/bin/python3

This package does not come with a testsuite.

To install the Python 3 module, run the following command as the root user:

make install

Contents

Installed Programs: None
Installed Libraries: None
Installed Directories: /usr/lib/python2.7/site-packages/pyatspi and/or /usr/lib/python3.7/site-packages/pyatspi

PyCairo-1.18.0

Introduction to PyCairo Module

PyCairo provides Python bindings to Cairo.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

PyCairo Dependencies

Required

Cairo-1.16.0

Recommended
Optional

Hypothesis (for tests)

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pycairo

Installation of PyCairo

Install PyCairo for Python2 by running the following commands:

python2 setup.py build

This package does not come with a test suite.

Now, as the root user:

python2 setup.py install --optimize=1   &&
python2 setup.py install_pycairo_header &&
python2 setup.py install_pkgconfig

Install PyCairo for Python3 by running the following commands:

python3 setup.py build

This package does not come with a test suite.

Now, as the root user:

python3 setup.py install --optimize=1   &&
python3 setup.py install_pycairo_header &&
python3 setup.py install_pkgconfig

Contents

Installed Programs: None
Installed Libraries: _cairo.so (python2) and _cairo.cpython-37m-x86_64-linux-gnu.so (python3)
Installed Directories: /usr/include/pycairo, /usr/lib/python2.7/site-packages/cairo /usr/lib/python2.7/site-packages/pycairo-1.18.0-py2.7.egg, /usr/lib/python3.7/site-packages/cairo , and /usr/lib/python3.7/site-packages/pycairo-1.18.0-py3.7.egg

PyCrypto-2.6.1

Introduction to the PyCrypto Module

PyCrypto is a collection of both secure hash functions (such as SHA256 and RIPEMD160), and various encryption algorithms (AES, DES, RSA, ElGamal, etc.).

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

PyCrypto Dependencies

Recommended

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pycrypto

Installation of PyCrypto

[Note]

Note

Both Python 2 and Python 3 modules can be built and installed without any conflicts.

To build the Python 2 module, run the following command:

python setup.py build

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To build the Python 3 module, run the following command:

python3 setup.py build

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Installed Programs: None
Installed Libraries: pycrypto-2.6.1-py2.7.egg-info and/or pycrypto-2.6.1-py3.6.egg-info
Installed Directories: /usr/lib/python2.7/site-packages/Crypto and/or /usr/lib/python3.7/site-packages/Crypto

PyGObject-2.28.7

Introduction to PyGObject Module

PyGObject-2.28.7 provides Python 2 bindings to the GObject class from GLib.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

PyGObject Dependencies

Required

GLib-2.58.3, PyCairo-1.18.0 (Python 2), and Python-2.7.15

Optional

gobject-introspection-1.58.3 and libxslt-1.1.33 (to Build Documentation)

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pygobject2

Installation of PyGObject

Install PyGObject by running the following commands:

./configure --prefix=/usr --disable-introspection &&
make

This package does not have a working testsuite.

Now, as the root user:

make install

Command Explanations

--disable-introspection: Omit this switch if you have installed gobject-introspection-1.58.3. Note that it conflicts with PyGObject-3.30.4.

--disable-docs: This option disables the rebuilding of the html documentation if libxslt-1.1.33 is installed.

Contents

Installed Programs: pygobject-codegen-2.0
Installed Libraries: libpyglib-2.0-python.so, _gio.so, unix.so, _glib.so and _gobject.so.
Installed Directories: /usr/include/pygtk-2.0, /usr/lib/python2.7/site-packages/gtk-2.0/{gio,glib,gobject}, /usr/share/gtk-doc/html/pygobject and /usr/share/pygobject/2.0

PyGObject-3.30.4

Introduction to PyGObject3 Module

PyGObject3 provides Python bindings to the GObject class from GLib.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

PyGObject3 Dependencies

Required

gobject-introspection-1.58.3 and PyCairo-1.18.0 (Python 3 module)

Recommended
Optional (for the tests)

pep8, pyflakes, and pytest

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pygobject3

Installation of PyGObject3

[Note]

Note

Both Python 2 and Python 3 modules can be built and installed without any conflicts.

To build PyGObject3 as a Python 2 module, run the following commands:

mkdir python2                        &&
pushd python2                        &&
meson --prefix=/usr -Dpython=python2 &&
ninja                                &&
popd

To test the results, issue: ninja -C python2 test. An already active graphical session with bus address is necessary to run the tests.

To build PyGObject3 as a Python 3 module, run the following commands:

mkdir python3                        &&
pushd python3                        &&
meson --prefix=/usr -Dpython=python3 &&
ninja                                &&
popd

To test the results, issue: ninja -C python3 test. An already active graphical session with bus address is necessary to run the tests.

To install the Python 2 module, run the following command as the root user:

ninja -C python2 install

To install the Python 3 module, run the following command as the root user:

ninja -C python3 install

Contents

Installed Programs: None
Installed Library: /usr/lib/python2.7/site-packages/gi/_gi{,_cairo}.so and/or /usr/lib/python3.7/site-packages/gi/_gi{,_cairo}.cpython-37m-<arch>-linux-gnu.so
Installed Directories: /usr/include/pygobject-3.0, and /usr/lib/python2.7/site-packages/{gi,pygtkcompat} and/or /usr/lib/python3.7/site-packages/{gi,pygtkcompat}

PyGTK-2.24.0

Introduction to PyGTK Module

PyGTK lets you to easily create programs with a graphical user interface using the Python programming language.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

PyGTK Dependencies

Required

PyGObject-2.28.7 and Python-2.7.15

Required (atk module)

ATK-2.30.0

Required (pango module)

Pango-1.42.4

Required (pangocairo module)

PyCairo-1.18.0 (Python 2) and Pango-1.42.4

Required (gtk and gtk.unixprint modules)

PyCairo-1.18.0 (Python 2) and GTK+-2.24.32.

Required (gtk.glade module)

PyCairo-1.18.0 (Python 2) and libglade-2.6.4.

Optional

NumPy

Optional (to Build Documentation)

libxslt-1.1.33

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pygtk

Installation of PyGTK

Install PyGTK by running the following commands:

./configure --prefix=/usr &&
make

The tests must be run from an active X display. If this is so, issue: make check.

Now, as the root user:

make install

Command Explanations

--enable-docs: This option enables rebuilding the html documentation if libxslt-1.1.33 is installed.

Contents

Installed Programs: pygtk-codegen-2.0 and pygtk-demo.
Installed Libraries: atk.so, _gtk.so, glade.so, gtkunixprint.so, pango.so and pangocairo.so.
Installed Directories: /usr/include/pygtk-2.0, /usr/lib/pygtk, /usr/lib/python2.7/site-packages/gtk-2.0, /usr/share/gtk-doc/html/pygtk and /usr/share/pygtk.

Short Descriptions

pygtk-codegen-2.0

is a wrapper script to run the PyGTK codegen module.

pygtk-demo

is a Python wrapper to run the PyGTK demo program.

PyXDG-0.25

Introduction to PyXDG Module

PyXDG is a Python library to access freedesktop.org standards.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

PyXDG Dependencies

Optional

Python-2.7.15

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pyxdg

Installation of PyXDG

To install the module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Installed Directory: /usr/lib/python3.7/site-packages/xdg

libxml2-2.9.9 (for its Python2 module)

Introduction to the libxml2 Python2 module

These instructions provide the Python2 bindings for libxml2: the Python3 bindings are built as part of libxml2-2.9.9 and most packages in the book do not use these bindings for the older Python2.

By building these bindings after libxml2-2.9.9 has been installed, there is no need to rebuild the time-consuming (if all dependencies are used) main part of that package.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

libxml2 (Python2) Dependencies

Required

libxml2-2.9.9 and Python-2.7.15

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/libxml2

Installation of libxml2 Python2 module

To build the Python 2 module, run:

cd python             &&
python setup.py build

To install the Python 2 module, as the root user run:

python setup.py install --optimize=1

Contents

Installed Programs: drv_libxml2.py, libxml2.py
Installed Libraries: libxml2mod.so
Installed Directories: None

Short Descriptions

drv_libxml2.py

is a SAX Python2 driver for libxml2.

libxml2.py

is the Python2 binding for libxml2.

libxml2mod.so

is the interface for Python2 to use libxml2.so.

lxml-4.3.1

Introduction to lxml

lxml provides Python bindings for libxslt-1.1.33 and libxml2-2.9.9.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

lxml Dependencies

Required

libxslt-1.1.33

Recommended
Optional (to run more tests)

GDB-8.2.1, Valgrind-3.14.0, and cssselect

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/lxml

Installation of lxml

[Note]

Note

Both Python 2 and Python 3 modules can be built and installed without any conflicts.

To build the Python 2 module, run:

python setup.py build

If you wish to run the tests, enter: make test. This will rebuild the package for inplace use before running the tests. One or more tests sometimes fail.

To install the Python 2 module, as the root user run:

python setup.py install --optimize=1

To build the Python 3 module, run:

python3 setup.py clean &&
python3 setup.py build

If you wish to run the tests, enter: make PYTHON=python3 test. This will rebuild the package for inplace use before running the tests. One or more tests sometimes fail.

To install the Python 3 module, as the root user run:

python3 setup.py install --optimize=1

Contents

Installed Programs: None
Installed Libraries: None
Installed Directories: /usr/lib/python2.7/site-packages/lxml, /usr/lib/python2.7/site-packages/lxml-4.3.1-py2.7-linux-$ARCH.egg-info and/or /usr/lib/python3.7/site-packages/lxml, /usr/lib/python3.7/site-packages/lxml-4.3.1-py3.7-linux-$ARCH.egg-info

MarkupSafe-1.1.0

Introduction to MarkupSafe Module

MarkupSafe is a Python module that implements a XML/HTML/XHTML Markup safe string.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/MarkupSafe

Installation of MarkupSafe

To build the module, run the following command:

python3 setup.py build

To install the module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Installed Programs: None
Installed Libraries: None
Installed Directories: /usr/lib/python3.7/site-packages/markupsafe and /usr/lib/python3.7/site-packages/MarkupSafe-1.1.0-py3.7.egg-info

Jinja2-2.10

Introduction to Jinja2 Module

Jinja2 is a Python module that implements a simple pythonic template language.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

Jinja2 Dependencies

Required

MarkupSafe-1.1.0

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/Jinja2

Installation of Jinja2

[Note]

Note

Both Python 2 and Python 3 modules can be built and installed without any conflicts.

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Installed Programs: None
Installed Libraries: None
Installed Directories: /usr/lib/python2.7/site-packages/Jinja2, /usr/lib/python2.7/site-packages/Jinja2-2.10-py2.7.egg-info and/or /usr/lib/python3.7/site-packages/Jinja2, /usr/lib/python3.7/site-packages/Jinja2-2.10-py3.7.egg-info

Mako-1.0.7

Introduction to Mako Module

Mako is a Python module that implements hyperfast and lightweight templating for the Python platform.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

Mako Dependencies

Required

MarkupSafe-1.1.0

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/Mako

Installation of Mako

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Installed Programs: mako-render3
Installed Libraries: None
Installed Directories: /usr/lib/python3.7/site-packages/mako and /usr/lib/python3.7/site-packages/Mako-1.0.7-py3.7.egg-info

PyYAML-3.13

Introduction to PyYAML Module

PyYAML is a Python module that implements the next generation YAML parser and emitter.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

PyYAML Dependencies

Required

YAML-0.2.1

Optional

Python-2.7.15

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/PyYAML

Installation of PyYAML

[Note]

Note

Both Python 2 and Python 3 modules can be built and installed without any conflicts.

To build the Python 2 module, run the following command:

python setup.py build

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To build the Python 3 module, run the following command:

python3 setup.py build

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Installed Programs: None
Installed Libraries: _yaml.so
Installed Directories: /usr/lib/python2.7/site-packages/yaml and/or /usr/lib/python3.7/site-packages/yaml,

Scour-0.37

Introduction to Scour

Scour is an SVG (Scalable Vector Graphics) optimizer/cleaner that reduces their size by optimizing structure and removing unnecessary data.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

Scour Dependencies

Required

six-1.12.0 (will be automatically downloaded and installed if not already present)

Recommended
[Note]

Note

The only use of Scour in this book is by applications which require Python2.

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/scour

Installation of scour

[Note]

Note

Both Python 2 and Python 3 modules can be built and installed without any conflicts.

To build the Python 2 module, run the following command:

python setup.py build

To partially test the results, issue: python testcss.py. If you have installed Six you can run the main tests by issuing: python testscour.py.

To install the Python 2 module run the following command as the root user:

python setup.py install --optimize=1

To build the Python 3 module, run the following command:

python3 setup.py build

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Installed Programs: scour
Installed Libraries: None
Installed Directories: None

Short Descriptions

scour

is a program to optimize and clean SVG files.

six-1.12.0

Introduction to Six Module

Six is a Python 2 and 3 compatibility library.

This package is known to build and work properly using an LFS-8.4 platform.

Package Information

Six Dependencies

Recommended Dependencies

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/six

Installation of six

[Note]

Note

Both Python 2 and Python 3 modules can be built and installed without any conflicts.

Install six for Python2 by running the following commands:

python2 setup.py build

This package does not come with a test suite.

Now, as the root user:

python2 setup.py install --optimize=1

Install six for Python3 by running the following commands:

python3 setup.py build

This package does not come with a test suite.

Now, as the root user:

python3 setup.py install --optimize=1

Contents

Installed Programs: None
Installed Libraries: None
Installed Directories: /usr/lib/python2.7/site-packages/six-1.12.0-py2.7.egg and/or /usr/lib/python3.7/site-packages/six-1.12.0-py3.7.egg

Last updated on 2019-01-11 12:54:44 -0800